MATCH Reader Interface Board

Model#: MRIB

Accepts up to 2 readers & 2 ScramblePads for dual technology entry & exit control of 1 door. Use with CCM 6.4 (or higher) & CR readers (see DIGI*TRAC Manual for compatible readers). 2 MATCH connectors with 6" pigtails. Provides 5VDC @ 250mA reader power. Mounting plate. UL Listed. CE.

 
 
Hirsch’s MATCH Interface makes conventional access control readers intelligent and provides a high security solution for access control. It is used with a Hirsch DIGI*TRAC™ controller.
 
[Note: this information mirrors the data sheet which covers several model numbers in this product family, therefore some information on this page may not apply to this particular model number.]

Features

  • Microprocessor Based
  • Mathematical Digitizing Algorithm
    • High Security Transmission
    • Eliminates Facility Codes
  • Supports “Off the Shelf” Cards
    • No Waiting on Card Orders
  • Mix Reader Technologies on One System
  • Data Formats
    • ABA Magnetic Stripe
    • Wiegand (26- to 55-Bit Format)
    • Proximity
    • Bar Code
    • Touch Memory
    • Barium Ferrite
    • RF (Radio Frequency)
    • Biometric
    • Wiegand No Parity
    • HID Corporate 1000 Format
    • Pass Through
  • Digital Transmission
    • Long Wiring Runs
    • Multi-drop Connections
  • Dual Technology Options
  • Entry and Exit Reader on One MATCH Interface Unit
  • Many Custom Formats Now Supported

Description

The MATCH Intelligent Reader Interface is installed at or near a conventional access control reader. It converts the reader’s analog or pulsed signals to a high security digital code. MATCH’s on-board 5VDC power source powers most readers. Used with a conventional reader, MATCH converts the card’s raw code into the security code used by a Hirsch DIGI*TRAC controller. There is no need to decipher the raw code. Existing card access systems can usually be upgraded without replacing the current cards.
 

High Security Communication Path

The MATCH interface has microprocessor intelligence. MATCH uses a complex mathematical algorithm to digitize the code for transmission to a DIGI*TRAC controller. Digital transmission permits longer wiring runs between a MATCH based reader and its controller than are normally available with conventional access technologies.
 

Multiple Reader Support

A single MATCH Interface will support both an entrance and an exit reader for the same door. MATCH interfaces are used on the same communication path with the Hirsch ScramblePad® and ScrambleProx®.
 

Accessories For MRIA

MB1 Flush Mounting Box
MB2 Surface Mounting Box
MB3 Heavy Duty Flush Mounting Box
MB4 Heavy Duty SurfaceMounting Box
MB/FFP Flat Faceplate
MB/SWS Shallow Wall, Semi-flush Spacer Ring
UMK Universal Mounting Kit (requires MB2)
 
[Note: this information mirrors the data sheet which covers several model numbers in this product family, therefore some information on this page may not apply to this particular model number.]

Note: The MATCH is designed to operate with a Hirsch DIGI*TRAC Controller.

Communications

  • Wiring From Controller: 2 pair, stranded, twisted, overall shield. Refer to controller specifications for distance
  • Supervision: Digital from controller
  • Wiring To Reader: Refer to reader specifications

Electrical

  • Operating Power
    • 70 mA @24VDC, with externally powered readers
    • 200 mA@24VDC, with 2 readers powered by MATCH
  • Reader Power: 2 terminals
    • 250 mA @ 5VDC each
  • RS232 Port (P1) For Enrollment Station

Physical

  • Physical Tamper Alarm (MRIA)
  • Dimensions:
    • MRIA: 5.75”H x 4.5”Wx2”D (14.6 cm x 11.4 cm x 5.1 cm)
    • MRIB: 4.5”H x 3.5”W x 1.75”D (11.4 cm x 8.9 cm x 4.4 cm)
  • Shipping Weight: 2 lb. (0.9kg)
  • Operating Temperature Range: 32°to 140°F (0° to 60°C)
  • Relative Humidity: 0 to 90%, non-condensing

Listings & Approvals

  • UL-ALVY (294), Access Control Systems Units
  • CUL-UEHX7, Signal Appliances
  • CE
[Note: this information mirrors the data sheet which covers several model numbers in this product family, therefore some information on this page may not apply to this particular model number.
The following products may work with the selected product:

Parts & Accessories » Controller & Computer Parts & Acc. » Replacement Parts Various

Parts & Accessories » Readers, Keypads, Biometrics Parts » Reader Interface Parts


The selected product may be part of the following products:

Readers, Keypads, Biometrics » Mag Stripe Readers » Mag Stripe Readers

Readers, Keypads, Biometrics » Mag Stripe Readers » Mag Stripe Assemblies

Parts & Accessories » Readers, Keypads, Biometrics Parts » Reader Parts Other

Readers, Keypads, Biometrics » Proximity Card Readers » Proximity Card Assemblies

Readers, Keypads, Biometrics » Proximity Card Readers » HID Prox Card Readers

Readers, Keypads, Biometrics » Wiegand Readers

Readers, Keypads, Biometrics » Bar Code Readers

Readers, Keypads, Biometrics » Biometric Readers » Hand Geometry Readers

Readers, Keypads, Biometrics » Biometric Readers » Iris Readers

Iris Camera- LG
CR-BIO-ICAM4000S

Readers, Keypads, Biometrics » Biometric Readers » Sagem

Readers, Keypads, Biometrics » Proximity Card Readers » Indala Wave Prox Card Readers

Readers, Keypads, Biometrics » Proximity Card Readers » Indala Curve Prox Card Readers

Readers, Keypads, Biometrics » Proximity Card Readers » Indala Arch Prox Card Readers

Readers, Keypads, Biometrics » Proximity Card Readers » Indala Linear Prox Card Readers

Readers, Keypads, Biometrics » Smart Card Readers » HID-iCLASS + Serial # Smart Card Readers

Readers, Keypads, Biometrics » Smart Card Readers » HID-iCLASS + PIV Smart Card Readers

Identity, Badging Accessories » Other Identity Accessories

Enrollment Keypad - USB
CR-KEYPAD-USB

Cards, Fobs, Tokens » Microwave Cards, Tokens

Readers, Keypads, Biometrics » Microwave Readers

Readers, Keypads, Biometrics » Smart Card Readers » Identive

Computer Log-on » Readers for Computer Log-on

Contact Enroll - SCM USB
CR-SCM-CE-USB

Other products in this category:
Data Sheet
MATCH data sheet PDF View
 
Send Hirsch A Message

© Hirsch Electronics. All Rights Reserved. Presentation is designed to communicate concepts, thus actual solutions may differ in implementation from that shown and are subject to change without notice. Other company or product names therein may be trademarks or registered trademarks of their respective owners and are respectfully acknowledged.